图片
地址:江苏省南京市建邺区江东中路118号德盈大厦1622
电话:025-8658 3475
传真:025-8658 3457
网址:http://www.en45545-2.com/
邮箱:info@fire-test.com
文章正文
美标ASTM E 1354热释放速率测试/NFPA130标准要求
作者:admin    发布于:2019-09-02 09:49:36    文字:【】【】【
摘要:美国轨道车辆防火烟毒测试标准NFPA130引用ASTM E 1354热释放速率测试来评估材料的防火性能,同时接合ASTM E662烟密度测试标准来综合评定。NFPA130标准为载客轨道车辆的系统要求。对于小部件产品可以根据ASTM E 1354标准来进行测试。更多关于ASTM E 1534及NFPA130标准要求请咨询南京睿督公司,咨询电话:025-8658 3475。

美国轨道车辆防火烟毒测试标准NFPA130引用ASTM E 1354热释放速率测试来评估材料的防火性能,同时接合ASTM E662烟密度测试标准来综合评定。NFPA130标准为载客轨道车辆的系统要求。对于小部件产品可以根据ASTM E 1354标准来进行测试。更多关于ASTM E 1534及NFPA130标准要求请咨询南京睿督公司,咨询电话:025-8658 3475。

If the surface are of any individual small part is less than 100cm2 in end use configuration, materials used to fabricate such a part should be permitted to be tested in accordance with ASTM E1354 as an alternative to both the ASTM E162 flammability test procedure or the appropriate flammability test procedure otherwise specifies in Table 8.4.1 and test ASTM E662 smoke generation test procedure.

ASTM E 1354材料热释放量及烟雾释放速率测试标准名称:

ASTM E 1354-17 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1354-17 耗氧量法测定材料释热及烟雾释放速率方法

ASTM E 1354材料热释放量及烟雾释放速率测试参考指标:

(a) 热释放率,由氧气消耗量决定(Rate of heat release, by measurement of the oxygen consumption, as determined by the oxygen concentration and the flow rate in the exhaust product stream);
(b) 有效热燃烧值和物质质量损失率(Effective heat of combustion from a concomitant measurement of specimen mass loss rate, in combination with the heat release rate);
(c) 烟释放率(Smoke release, by obscuration of light by the combustion product stream);
(d) 可燃性,产品加热后从不燃到可燃的时间(Ignitability, as a measurement of time from initial exposure to time of sustained flaming)。

ASTM E 1354材料释热及烟雾释放速率测试摘要:

ASTM E 1354测试方法用于确定材料及产品的可燃性,热释放速率,质量损失率,燃烧的有效热量,和可见烟雾量。

该测试方法主要目的是确定热量的变化,也包括测定燃烧的有效热量,质量损失率,持续燃烧时间,和烟雾量。该属性确认在最终用途上有代表性的小规格样本。

ASTM E 1354材料释热及烟雾释放速率测试其他相关标准:

-  ISO5660对火反应试验—热释放、产烟量及质量损失率
-  AS/NZS 3837:用氧耗计测试材料和产品的释热性和生烟性的测试方法
-  ASTM E136 在750C温度的垂直管炉下材料性能的测定方法
-  ASTM E162 使用辐射热能源测定材料的表面燃烧性能
-  ASTM E662由固体材料产生的烟雾的特定光密度标准试验方法

相关标准阅读

EN ISO5660-1测试 http://www.fire-test.com/teststandard/eu/3357.html     "
AS3837测试 http://www.fire-test.com/teststandard/other/3434.html  
NFPA130测试 http://www.fire-test.com/teststandard/usa/10677.html   

NFPA130标准引用ASTM E 1354标准进行防火性能测试,NFPA130标准要求请咨询南京睿督公司。
南京睿督咨询电话:025-8658 3475   400-603-6575
网址:www.fire-test.com 
邮箱:info@fire-test.com 

……



图片
版权所有 Copyright(C)2012-2015 南京睿督科技有限公司 苏公网安备 32010502010102号 苏ICP备12030029号-5
电话:025-8658 3475  传真:025-8658 3457  网址:http://www.en45545-2.com/   邮箱:info@fire-test.com