AS1530.4: Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance tests for elements of construction

AS4072.1: Analysing Material Reaction to Fire Performance, Components for the protection of openings in fire-resistant separating elements. Part 1: Service penetrations and control joints

AS1530.4 and AS4072.1 are key standards in fire testing, each with distinct focuses that work together. This article aims to clarify their differences, addressing the common confusion between them and their significance in fire testing. 

Conclusion 

Understanding the distinctions between AS1530.4 and AS4072.1 is vital for professionals involved in building design and construction. AS1530.4 ensures the fire-resistance of major construction elements, while AS4072.1 focuses on the integrity of openings within these elements. Both standards work together to provide a comprehensive approach to fire safety, ensuring buildings are both structurally sound and capable of preventing the spread of fire and smoke.
AS1530.4: Fire-resistance tests for elements of construction

Scope and Purpose

AS1530.4 provides methods for determining the fire resistance of various elements of construction when subjected to standard fire exposure conditions. The primary objective of this standard is to assess how different construction components, such as walls, floors, and doors, withstand exposure to fire. The standard aims to ensure that these elements can maintain structural integrity and limit the spread of fire and smoke, thereby providing a safe means of escape for occupants and protection for firefighters.

Key Components

Fire-Resistance Testing: AS1530.4 establishes the Fire-Resistance Rating (FRR), which indicates the duration for which a construction element can withstand fire exposure. This rating is determined by testing the element under controlled conditions and measuring its performance against criteria such as structural adequacy, integrity, and insulation.

Testing Procedures

The standard specifies detailed procedures for subjecting construction elements to fire conditions. This includes the application of heat in a furnace that simulates real fire scenarios and the measurement of various performance parameters.

Performance Criteria: The performance of construction elements is evaluated based on:

Structural Adequacy: The ability of the element to bear loads during fire exposure.
Integrity: The ability of the element to prevent the passage of flames and hot gases.
Insulation: The ability of the element to limit temperature rise on the non-fire side.

Additional Notes:

AS 1720.4, AS 3600, AS 3700, and AS 4100 may also be referenced for determining the fire resistance of construction elements.

Smoke production and spread assessment is outside the scope of this standard. 

AS4072.1: Components for the Protection of Openings in Fire-Resistant Separating Elements

Scope and Purpose

AS4072.1 specifies requirements for the testing, interpretation of test results, and installation of penetration sealing systems and control joints sealing systems in fire-resistant elements of construction. The standard is based on the testing of standard configurations and provides minimum requirements for these fire-stopping systems. It is intended to be read in conjunction with the testing regimes set out in AS1530.4.

Key Components

The standard specifies minimum requirements for the construction, installation, and application of fire resistance tests to sealing systems, ensuring they maintain the fire resistance of the elements they penetrate or join.

Penetration Seals: The standard outlines requirements for sealing systems around penetrations through separating building elements that are required to have a Fire Resistance Level (FRL) or, if applicable, resistance to the incipient spread of fire.

Control Joints: It also covers sealing systems at control joints between building elements that are required to have an FRL.

Additional Notes:

The standard does not address smoke leakage through sealing systems around penetrations and control joints.

Regulatory authorities often require evidence of compliance for installed sealing systems.

NATA's accreditation requirements (AWTA), Nanjing SMART Provides NATA- AS1530.1,AS1530.2,AS1530.3,AS1530.4, https://www.fire-test.com/newsinfo/5563923.html  

◆ Contact Us

Hotline：+86 25-8658 3475   +86 25-8658 3465
Website：www.firete.com   www.fire-test.com
Email：info@fire-test.com 
Wechat： firetesting  or  17714189018

...